Table of Contents
Advertisement
7
Install the new card into the add-in slot.
You can slightly seesaw the card end-to-end to help insert the card, but
do not bend the card sideways.
8
Push the add-in card retention cover inward, then secure the add-in card
retention cover with the retention thumbscrew.
9
If you disconnected any cables, reconnect the add-in card cables using your
notes from Step 4. See the add-in card documentation for further
instructions.
10
Close the case by following the instructions in
page
104.
11
See the documentation that came with the add-in card for any special
software installation instructions.
Replacing the power supply
To replace the power supply:
1
Identify your computer case style. For more information, see
your computer case style" on page
2
Open the case by following the instructions in
page
101.
100.
www.gateway.com
Gateway Mid Tower Case
"Closing the case" on
"Identifying
"Opening the case" on
115
Advertisement
Table of Contents
Troubleshooting
