Gateway E1400 System Manual page 44

7
Place the new drive into the drive cage. Make sure the threaded holes
on the drive align with the locking tab holes on the drive cage.
5.25-inch
device
8
Replace the drive locking tab.
9
Connect the power and data cables to the drive.
10
Push the release button in and slide the drive cage back into the chassis
until the button snaps into the rear locking hole.
11
Replace the right panel.
12
Reconnect the power cord and all other cords you removed, then turn
on the system.
Adding a second 5.25-inch device
37