Gr (Go After Reset Cpu) - Epson S5U1C62000A Manual

gr
(go after reset CPU)
Function
This command executes the target program from the boot address after resetting the CPU.
Format
>gr (direct input mode)
Operation
This command resets the CPU before executing the program. This causes the PC to be set at address
0x100, from which the command starts executing the program.
Once the program starts executing, the command operates in the same way as the g command.
GUI utility
[Run | Go from Reset] menu item, [Go from Reset] button
When this menu item or button is selected, the gr command is executed.
[Go from Reset] button
S5U1C62000A MANUAL
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
EPSON
CHAPTER 9: DEBUGGER
171