Lo (Load Option) - Epson S5U1C62000A Manual

CHAPTER 9: DEBUGGER
lo
(load option)
Function
This command loads an Intel HEX format program or option file listed below into the debugger.
File
Program file
Function option data file
Segment option data file
Melody data file*
Format
(1) >lo <file name>
(2) >lo
File Name ...? <file name>
>
<file name>: File name to be loaded (path can also be specified)
Examples
Format (1)
>lo testl.hex
Loading file ... OK!
>
Format (2)
>lo
File name ? tests.hex
Loading file ... OK!
>
Notes
• The debugger determines the file type based on the specified file name. Therefore, the debugger
cannot load a file not following to the name specification listed above, and an error will result.
Error : File name error.
• If an error occurs when loading a file, portions of the file that have already been read are left as they
were loaded.
GUI utility
[File | Load Option ...] menu item, [Load Option] button
When this menu item or button is selected, a dialog box appears allowing selection of a hex file to be
loaded.
[Load Option] button
196
Name specification
~h.hex (4 high-order bits), ~l.hex (8 low-order bits)
~f.hex
~s.hex
~a.hex
Not used in some microcomputer models
(direct input mode)
(guidance mode)
... Loads the program files testl.hex and testh.hex.
... Loads a segment option file.
EPSON
S5U1C62000A MANUAL
(S1C60/62 FAMILY ASSEMBLER PACKAGE)