Mode Setting; Otf (On-The-Fly Display) - Epson S5U1C62000A Manual

CHAPTER 9: DEBUGGER

9.9.18 Mode Setting

otf
(on-the-fly display)
Function
This command selects whether or not to run the on-the-fly display during target program execution
by the g (go) or gr (go after reset) command.
Format
>otf (direct input mode)
Example
>otf
Set on-the-fly display off. ... This command toggles the on-the-fly display function.
>otf
Set on-the-fly display on.
Note
The on-the-fly display is turned on at power on by default.
GUI utility
[Option | Mode Setting...] menu item
When this menu item is selected, a dialog box appears allowing selection of the on-the-fly display
option.
216
Use the [On-the-fly Display] check box for this
selection.
EPSON
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
S5U1C62000A MANUAL