Cv (Coverage); Coverage - Epson S5U1C62000A Manual

CHAPTER 9: DEBUGGER

9.9.14 Coverage

cv
(coverage)
Function
This command displays coverage information (addresses where the program is executed).
The coverage information is displayed in the [Command] window.
Format
>cv [<address1> [<address2>]]
<address1>: Start address; hexadecimal or symbol (IEEE-695 format only)
<address2>: End address; hexadecimal or symbol (IEEE-695 format only)
Condition: 0 address1
Example
>cv 100 1ff
Coverage Information:
0: 0100..0108
>
Notes
• The addresses specified here must be within the range of the program memory area available with
each microcomputer model.
An error results if the input one is not a hexadecimal number or a valid symbol.
Error : invalid value.
An error results if the limit is exceeded.
Error : Program address out of range.
• If the cv command is input without <address1> and <address2>, coverage information in all address
is displayed; if both <address1> and <address2> are specified, coverage information within the
specified address range is displayed; if just <address1> is specified, the end address is treated as the
maximum program address and coverage information within that range is displayed.
GUI utility
None
210
(direct input mode)
address2 last program memory address
... Displays the executed addresses within the range from 0x100 to 0x1ff.
EPSON
S5U1C62000A MANUAL
(S1C60/62 FAMILY ASSEMBLER PACKAGE)