Table of Contents
Advertisement
CHAPTER 8: DISASSEMBLER
8.6 Error/Warning Messages
8.6.1 Errors
When an error occurs, the disassembler immediately terminates the processing after displaying an error
message. It will not output a source file.
The disassembler error messages are given below.
Error message
Cannot create <file kind> file <FILE NAME>
Cannot open <file kind> file <FILE NAME>
Cannot read <file kind> file <FILE NAME>
Cannot write <file kind> file <FILE NAME>
Illegal file name <FILE NAME>
Illegal HEX data format
Illegal offset address <offset address>
Illegal option <option>
No ICE parameter file specified
Out of memory
8.6.2 Warning
Even if a warning is issued, the disassembler keeps on processing, and completes the processing after
displaying a warning message, unless, in addition, any error is produced.
Warning message
Input file name extension .XXX conflict
118
Description
The file cannot be created.
The file cannot be opened.
The file cannot be read.
Data cannot be written to the file.
The specified input file name is incorrect.
The input file is not an Intel-HEX format file.
The specified address is invalid.
An illegal option is specified.
ICE parameter file is not specified.
Cannot secure memory space.
Description
Two or more file names with the same extension have been
specified. The last one is used.
EPSON
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
S5U1C62000A MANUAL
Advertisement
Table of Contents
