Starting Method - Epson S5U1C62000A Manual

5.3 Starting Method

General form of command line
as62 ^ [options] ^ [<source file name>]
^ denotes a space.
[ ] indicates the possibility to omit.
Source file name
In the command line, only one assembly source file can be specified at a time. Therefore, you will
have to process multiple files by executing the assembler the number of times equal to the number of
files to be processed.
A long file name supported in Windows and a path name can be specified. When including spaces in
the file name, enclose the file name with double quotation marks (").
Options
The assembler comes provided with five types of start-up options:
-d <define name>
Function: Definition of Define name
Explanation: • Works in the same manner as you describe "#define <define name>" at top of
-g
Function: Addition of debugging information
Explanation: • Creates an output file containing symbolic/source debugging information.
Default: If this option is not specified, no debugging information will be added to the
-o <file name>
Function: Specification of output path/file name
Explanation: • Specifies an output path/file name without extension or with an extension ".o".
Default: The input file name is used for the output files.
-l
Function: Output of relocatable list file
Explanation: • Outputs a relocatable list file.
Default: If this option is not specified, no relocatable list file will be output.
-e
Function: Output of error file
Explanation: • Also delivers in a file (<File name>.err) the contents that are output by the
Default: If this option is not specified, no error file will be output.
When entering an option in the command line, you need to place one or more spaces before and after
the option. The options can be specified in any order. It is also possible to enter options after the
source file name.
Example: c:\e0c62\bin\as62 -g -e -l -d TEST1 -d TEST2 test.s
S5U1C62000A MANUAL
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
the source. It is an option to control the conditional assembly at the start-up.
• One or more spaces are necessary between -d and the <define name>.
• To define two or more Define names, repeat the specification of "-d <define
name>".
• Always specify this function when you perform symbolic/source debugging.
relocatable object file.
If no extension is specified, ".o" will be supplemented at the end of the specified
output path/file name.
assembler via the Standard Output (stdout), such as error messages.
EPSON
CHAPTER 5: ASSEMBLER
49