Executing From Menu Or Tool Bar - Epson S5U1C62000A Manual

CHAPTER 9: DEBUGGER

9.7.2 Executing from Menu or Tool Bar

The menu and tool bar are assigned frequently-used commands as described in Sections 9.5 and 9.6. A
command can be executed simply by selecting desired menu command or clicking on the tool bar button.
Table 9.7.2.1 lists the commands assigned to the menu and tool bar.
Table 9.7.2.1 Commands that can be specified from menu or tool bar
Command
lf Load IEEE-695 absolute object file
lo Load Intel-HEX file
g Execute program successively
g <address> Execute program to <address> successively
gr Reset CPU and execute program successively
s Step into
n Step over
com Load and execute command file
rst Reset CPU
bp, bpc Set/clear PC breakpoint
bd, bdc Set/clear data break
br, brc Set/clear register break
bm, bmc Set/clear multiple break
bac Clear all break conditions
ta, tac Set/clear trace area
tc Set trace condition
ts Search trace information
tf Save trace information to a file
u Unassemble display
sc Source display
m Mix display
dd Dump data memory
rd Display register values
td Display trace information
log Turn log output on or off
rec Record commands to a command file
otf, be/bsyn, tim Set modes
rom Set ROM type
138
Function
EPSON
Menu
[File | Load File...]
[File | Load Option...]
[Run | Go]
[Run | Go to Cursor]
[Run | Go from Reset]
[Run | Step]
[Run | Next]
[Run | Command File...]
[Run | Reset CPU]
[Break | Breakpoint Set...]
[Break | Data Break...]
[Break | Register Break...]
[Break | Multiple Break...]
[Break | Break All Clear]
[Trace | Trace Area...]
[Trace | Trace Condition...]
[Trace | Trace Search...]
[Trace | Trace File...]
[View | Program | Unassemble]
[View | Program | Source Display]
[View | Program | Mix Mode]
[View | Data Dump]
[View | Register]
[View | Trace]
[Option | Log...]
[Option | Record...]
[Option | Mode Setting...]
[Option | Rom Type...]
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
Button
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
S5U1C62000A MANUAL