Fujitsu ETERNUS User Manual page 31

Chapter 2 Setup
> 2.4 Modifying the ETERNUSmgr Top Menu System
Procedure
1
2
3
4
2.4.1.2 ETERNUSmgr for Windows® Procedure
This section explains what to do for the Windows® versions of ETERNUSmgr. This procedure
shows how to change the top menu directory and then edit "menu.htm". If you are not going to
change the top menu directory, start from
Procedure
1
2
3
P2X0-0202-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
Confirm the current Top Menu directory (specified during installation).
Make sure that all the necessary files (fujitsu.gif, index.htm, menu.htm, eternus.gif) have
been installed.
#ls /(current Top Menu directory)/www/
fujitsu.gif index.htm menu.htm eternus.gif
Copy all the Top Menu files to the new Top Menu directory.
#cp /(current Top Menu directory)/www/* /(new Top Menu directory)/
Confirm the copy results.
# ls /(new Top Menu directory)/
fujitsu.gif index.htm menu.htm eternus.gif
Edit the copied Top Menu file.
# vi /(new Top Menu directory)/menu.htm
Check the current Top Menu directory (specified during installation) with
Explorer.
Make sure that all the necessary files (fujitsu.gif, index.htm, menu.htm, eternus.gif) have
been installed.
Copy all the Top Menu files to the new Top Menu directory.
Confirm the copy results using Explorer.
Step 4.
31
End of procedure
Copyright 2009 FUJITSU LIMITED