Fujitsu ETERNUS User Manual page 51

Chapter 5 Cautions
>
• After uninstalling ETERNUSmgr, if you delete or change the name of the original installation
directory, a "This may have an effect on the registered application. Are you sure you want to
continue?" message will appear. If uninstallation has completed normally, this will not be a
problem.
• Various settings
• Windows® 2000, Windows Server® 2003, and Windows Server® 2003 R2 have an energy
saving mode, but since the ETERNUSmgr monitoring functions are inoperative when the OS
is suspended or sleeping, use of this mode should be avoided.
• With a GRmgr V10L30 or V10L40 setup file, the following parameter descriptions must be
added before the E-mail notification function (available from GRmgr V10L50) can be used by
ETERNUSmgr:
-
-
-
• The Mail Server SMTP Port description must be added when the SMTP port No. is other than
the default (25). For details on the above parameters, see
(ETERNUSmgr for Windows® only)" (page
P2X0-0202-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
# Admin Mail Address
ADMIN_MAIL = (Admin Mail Address)
# Mail Server Address
ADMIN_MAILSV = (Mail Server Address)
# Mail Server SMTP Port
SMTP_PORT = (Mail Server SMTP Port)
These additions are not necessary if the E-mail notification function is not used.
For details on the above parameters, see
Server Address (ETERNUSmgr for Windows® only)" (page
"Admin Mail Address" (page 22)
"Mail Server SMTP Port
23).
51
and "Mail
23).
Copyright 2009 FUJITSU LIMITED