Fujitsu ETERNUS User Manual page 35

Chapter 2 Setup
> 2.5 Monitoring Multiple Target Devices
2.5.2.1 ETERNUSmgr for Solaris OS, HP-UX, AIX, and Linux
When adding extra machines, it is easiest to just copy and edit an existing setup file.
Procedure
1
2
3
4
2.5.2.2 ETERNUSmgr for Windows®
When adding extra machines, it is easiest to just copy and edit an existing setup file.
Procedure
1
P2X0-0202-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
No special text editor is required to edit a setup file.
Confirm the contents of the installation directory.
Make sure that the necessary files and directories (stxchk, _STXPOLL.INI,
STXPOLL_1.INI, stxpoll, stxpolld, www/) have all been installed.
# ls /opt/FJSVgrmgr/
stxchk _STXPOLL.INI
Copy an existing setup file.
File name starts with "STX" and ends with ".INI".
# cp /opt/FJSVgrmgr/STXPOLL_1.INI /opt/FJSVgrmgr/STXPOLL_2.INI
Confirm the copy results.
# ls /opt/FJSVgrmgr/
stxchk _STXPOLL.INI
www/
Edit the copied file. (The STXPOLL_2.INI file is used here.)
Vi editor is used here.
Refer to "2.3 Setting Items" (page 18)
changed in the new setup file.
# vi /opt/FJSVgrmgr/STXPOLL_2.INI
"_STXPOLL.INI" is provided as a model file. If you copy this file to make
a new setup file, be sure to keep the original file as is.
Confirm the contents of the installation directory using Explorer, etc.
Make sure the following files and folder have been installed in the installation directory:
_stxpoll.ini, STXPOLL.exe, STXPOLL_1.INI, stxpolld.exe, stxsmail.exe, and \www (\www
is a folder).
STXPOLL_1.INI stxpoll
STXPOLL_1.INI STXPOLL_2.INI
for details of how and which parameters should be
35
stxpolld www/
stxpoll stxpolld
End of procedure
Copyright 2009 FUJITSU LIMITED