Fujitsu ETERNUS User Manual page 9

Chapter 1 About ETERNUSmgr
> 1.1 ETERNUSmgr Outline
ETERNUSmgr System Configuration
LAN
The ETERNUSmgr server and work server may be collocated on the same physical server.
The management server must be running when ETERNUSmgr is used to perform maintenance
tasks.
Network Requirements
When setting up the firewall between the server, client, and target device, the following port num-
bers must be set to allow the subsequent transmission to pass the firewall.
• Client communication
Communication
Managing Server
Target Device
(ETERNUS2000)
Target Device
(Other than
ETERNUS2000)
*1: Depends on Web Server program settings
*2: Port number can be changed for the ETERNUS DX400 series, ETERNUS DX8000 series,
ETERNUS4000 models 300, 400, 500, and 600, and ETERNUS8000.
P2X0-0202-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
Managing Server
Windows/Solaris OS/HP-UX/AIX/Linux
Mail Server
(Windows version excluded)
Web Server program
Frontend
- Status monitoring and
mail notification
Mail Server
(Windows
Work Server
version Only)
Port No./
target Protocol
80/tcp (*1)
80/tcp or 443/
tcp
80/tcp (*2)
Client
Web Browser
Java Runtime Environment
(for ETERNUS2000)
WAN
ETERNUS Disk storage
system
Backend
Fibre
- Status display
Channel
- Configuration display
and change
- Setup and
maintenance
Communication
direction
Client → Managing
Server
Client → Target Device
Client → Target Device
9
Function
Display top menu
Display alarm history
files
Display device
configuration
Setup and maintenance
Display device
configuration
Setup and maintenance
Copyright 2009 FUJITSU LIMITED