Reversing The Door - Fisher & Paykel Dryer Installation Instructions Manual

Reversing the Door
Tools Need:
a Standard #2 Phillips screwdriver
Tape tipped putty knife
• Needle nosed pliers
1 Open the door and remove the filler plugs opposite the hinges.
2 With the door completely open, remove the bottom screw
from each hinge or] the dryer face.
3 Insert these screws about half way into the top holes,for
each hinge, or] the opposite side (where you removed the
filler plugs). Apply firm pressure to get the screw started in
untapped holes.
4 Looser] the top screw from each hinge or] the dryer face half
way.
5 With one hand holding the top of the door and the other hand
holding the bottom, remove the door from the dryer by lifting
it up and out.
6 Rotate the door 180°. Insert it or] the opposite side of the
opening by moving the door in and down until the top hinge
and the bottom hinge are resting or] the two top screws
inserted in step 3.
7 Remove the remaining screws from the side of the opening
from which the door was removed. With these screws secure
each hinge at the bottom.
8 Tighter] the two top screws of each hinge.
9 Reinsert the plastic plugs or] the side from which the door was
removed.
32