Figure 7- Connect Each Cpu Using A Hdusbvext-Xx-Mm Cable - Network Technologies UNIMUX series Installation And Operation Manual

NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH
3. For each CPU:
• Connect a USB type A cable end of a HDUSBVEXT-xx-MM cable to a USB type A female user device port on a CPU.
• Connect the 15HD blue male cable end of a HDUSBVEXT-xx-MM cable to the video port of the same CPU.
• Connect the 15HD yellow male cable end of the HDUSBVEXT-xx-MM cable to a yellow "CPU x" port on the UNIMUX
switch. (See Figure 7)
16 8
CPU
250V,2A
NETWORK TECHNOLOGIES INCORPORATED
Rear View of Windows USB CPU
Input Device Port
USB Type A Female
Video Port
15HD Female
Video Connector

Figure 7- Connect each CPU using a HDUSBVEXT-xx-MM cable

4. Power-up
The UNIMUX can be powered at any time.
•
The CPUs can be powered at any time although if a CPU needs a keyboard and/or mouse at power-ON it should be powered
•
after connecting to and powering-ON the UNIMUX.
USB input devices (keyboard and mouse) can be hot plugged to and from the UNIMUX at any time.
•
Note: The order in which the CPUs and switch are powered up does not matter. A power strip can be used.
Rear View of UNIMUX-USBV-16HDU
15 7 14 6 12
CPU 13 5
1275 Danner Drive, Aurora Ohio 44202 330-562-7070
15HD Male
Video Connector
4 11 3 10 2
CPU CPU 9 1
www.networktechinc.com
USB Type A Male
HDUSBVEXT-xx-MM
(3,6,10 and 15 foot cables available)
8
MONITOR
RS232
15HD High Density
(Yellow) FemaleConnector
15HD Male
Video Connector