Table of Contents
Advertisement
NTI UNIMUX SERIES USB KVM SWITCH
5.
Connect each CPU to the USB switch using a DVI-HDMI-MM-x (x=3, 6, 10, or 15 foot) cable for each video connection
and a USB-AB-yM (y= .5, 1, 2, 3, or 5 meters) for each input device connection – REQUIRED (not supplied). (See Fig. 5
below.) Cables are available from NTI.
6.
Group the input device and monitor interface cables from each CPU, making sure that cables from the first CPU are
connected to the UNIMUX at connectors CPU 1 and VIDEO 1. Cables from the second CPU should
connect to CPU 2 and VIDEO 2 connectors...etc.
RS232
CPU 8
CPU 7
CPU 6
5VDC
-
+
Rear View of Windows USB CPU
Input Device Port
USB Type A Female
Video Port
DVI Female
Video Connector
7.
Connect the AC adapter to the UNIMUX. (See Fig. 6 below.)
RS232
5VDC
-
+
5 VDC
AC
ADAPTER
Rear View of UNIMUX-DVI-8
CPU 5
CPU 4
CPU 3
CPU 2
CPU 1
VIDEO 8
USB Type B
Female
Figure 5- Connect each CPU
CPU 8
CPU 7
CPU 6
CPU 5
CPU 4
CPU 3
CPU 2
Figure 6- Connect the AC adapter
VIDEO 7
VIDEO 6
VIDEO 5
VIDEO 4
USB Type A Male
USB-AB-xM
DVI-HDMI-MM-x
Mating Face of
Mating Face of
DVI Male
HDMI Type A Male
Rear View of UNIMUX-DVI-8
CPU 1
VIDEO 8
VIDEO 7
VIDEO 6
VIDEO 5
6
VIDEO 3
VIDEO 2
VIDEO 1
HDMI Type A
Video Connector
VIDEO 4
VIDEO 3
VIDEO 2
VIDEO 1
Advertisement
Table of Contents
