Table of Contents
Advertisement
NTI NODEMUX MULTI-USER UNIVERSAL KVM SWITCH
4.
Connect a VEXT-xx-MM (and adapter if needed) from the video port of the CPU to a port labeled "VIDEO x" on the
NODEMUX with the same port number as the keyboard. Make sure the CPU is connected to a "CPU x" port and a "VIDEO x"
port with the same number. Otherwise the user's typing may be going to one CPU, but the user will be viewing a different
CPU on the monitor.
USER 4
Rear View of PS/2 CPU
Input Device Ports
6 miniDIN Female
Video Port
15HD Female
Video Connector
5. Plug the NTI Switch into an AC power outlet.
6. Turn ON power to the NTI Switch, the LCD should illuminate.
7. Turn ON power to any or all CPUs connected to the NTI Switch.
FYI: The order in which the CPUs and switch are turned ON does not matter. A power strip can be used.
Rear View of NODEMUX
NTI
USER 3
USER 2
USER 1
R
NETWORK
1275 Danner Dr
TECHNOLOGIES
Aurora, OH 44202
INCORPORATED
CPU 16
CPU 15
CPU 14
CPU 13
MONITOR 3
MONITOR 1
VIDEO 15
VIDEO 13
R
S
2
MONITOR 4
MONITOR 2
VIDEO 16
VIDEO 14
3
2
6mD Male
Connectors
Purple- Keyboard
Green- Mouse
Figure 4- Connect PS/2 CPU to NODEMUX
8 miniDIN
Female Connector
Tel:330-562-7070
www.nti1.com
Fax:330-562-1999
CPU 12
CPU 11
CPU 10
CPU 9
CPU 8
CPU 7
CPU 6
CPU 5
VIDEO 11
VIDEO 9
VIDEO 7
VIDEO 5
VIDEO 12
VIDEO 10
VIDEO 8
VIDEO 6
VIDEO 1
15HD Female
Video Connector
Beige
VKTINT-xx-MM
VEXT-xx-MM
15HD Male
Video Connector
9
CPU 1
CPU 4
CPU 3
CPU 2
CPU 1
VIDEO 3
VIDEO 1
VIDEO 4
VIDEO 2
8 miniDIN
Male Connector
Advertisement
Table of Contents
