Hot-Swap Hard Disk Drive Backplane - Lenovo ThinkServer RD530 Hardware Maintenance Manual

ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter)
The following illustration shows the connectors on the ThinkServer RAID 700 Adapter.
Figure 15. ThinkServer RAID 700 Adapter
1
Ports 7-4
2
Ports 3-0
1 Ports 7-4
Used to connect a mini-SAS signal cable. See "Mini-SAS to mini-SAS signal cable connections" on page 31.
2 Ports 3-0
Used to connect a mini-SAS signal cable. See "Mini-SAS to mini-SAS signal cable connections" on page 31.
3 ThinkServer RAID 700 Battery connector
Used to connect a ThinkServer RAID 700 Battery. See "Installing or removing the ThinkServer RAID 700
Battery" on page 86.

Hot-swap hard disk drive backplane

Your server comes with one of the following hot-swap hard disk drive bay and backplane configurations:
• Up to four 3.5-inch hot-swap SATA or SAS hard disk drives with one backplane
• Up to eight 2.5-inch hot-swap SAS hard disk drives or SATA solid-state drives with one backplane
28
ThinkServer RD530 Hardware Maintenance Manual
3
ThinkServer RAID 700 Battery connector