Lenovo ThinkServer RD530 Hardware Maintenance Manual page 148

Hardware maintenance manual - thinkserver rd530
Hide thumbs Also See for ThinkServer RD530:
Table of Contents

Advertisement

13. Remove the heat sink(s) and place them on a clean, flat, and static-protective surface. See "Installing
or replacing a heat sink" on page 99.
14. Disconnect all cables from the system board. Then, remove the ten screws that secure the system
board following the recommended numerical sequence as shown.
Figure 96. Removing the screws that secure the system board
134
ThinkServer RD530 Hardware Maintenance Manual

Advertisement

Table of Contents
loading

Table of Contents