Lenovo ThinkServer RD530 Hardware Maintenance Manual page 120

11. Remove the plastic microprocessor socket cover. Store the microprocessor socket cover in the event
that you later remove the microprocessor and need the socket cover to protect the pins on the socket.
Note: Do not remove the socket cover until you install a microprocessor into the socket. If you remove
the microprocessor, install the socket cover or a new microprocessor immediately.
Figure 64. Removing the microprocessor socket cover
12. Close the microprocessor retainer. Press down the small handle
to secure it. Then, press down the small handle
into position and secure the new microprocessor in the socket.
Note: There are two marks on the microprocessor retainer. Ensure that you close the small handle
marked with
sequence when you close the small handles.
Figure 65. Securing the microprocessor in the socket
13. Install the new heat sink that comes with the microprocessor option kit. See "Installing or replacing a
heat sink" on page 99.
106
ThinkServer RD530 Hardware Maintenance Manual
first and then close the small handle marked with
1 first and then push the handle inward
2 and then push the handle inward to lock the retainer
. Always follow the correct