Lenovo ThinkServer RD530 Hardware Maintenance Manual page 107

5. Locate the TPM connector on the system board and then insert the TPM into the TPM connector.
Figure 52. Installing the TPM
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 139. Then, you can
configure the TPM function in the Setup Utility program. See "Configuring the TPM function" on page 50.
Removing the ThinkServer Trusted Platform Module
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 61.
This topic provides instructions on how to remove the TPM if the server has one installed.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
.
Chapter 6 Installing, removing, or replacing hardware
93