Lenovo ThinkServer RD530 Hardware Maintenance Manual page 101

Hardware maintenance manual - thinkserver rd530
Hide thumbs Also See for ThinkServer RD530:
Table of Contents

Advertisement

8. With the front side up, place the ThinkServer RAID 700 Adapter on a flat, clean, and static-free surface.
9. Touch the static-protective package that contains the TR 700 Battery to any unpainted surface on the
outside of the server. Then, take the TR 700 Battery out of the package.
10. Hold the TR 700 Battery with the battery side up and the J1 board-to-board connector
the J6B1 BBU connector
onto the ThinkServer RAID 700 Adapter so that the two connectors are firmly joined. Then, install the
three screws that come with the TR 700 Battery option kit to secure the TR 700 Battery in place.
Figure 48. Installing the TR 700 Battery
Note: When attaching the TR 700 Battery to the ThinkServer RAID 700 Adapter, center the screwdriver
to avoid damaging the screw head and do not over-tighten the screws as you might damage the
TR 700 Battery.
11. Reinstall the ThinkServer RAID 700 Adapter to the riser card assembly 2. See "Replacing the RAID
card" on page 80.
12. Reconnect cables to the ThinkServer RAID 700 Adapter. See "Mini-SAS to mini-SAS signal cable
connections" on page 31.
13. Reinstall the riser card assembly 2. The procedure is similar to that of the riser card assembly 1. See
"Replacing the riser card assembly 1" on page 128.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 139. Then, configure
RAID for your server. See "Configuring RAID" on page 56.
Removing the ThinkServer RAID 700 Battery
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 61.
This topic provides instructions on how to remove the TR 700 Battery from the ThinkServer RAID 700
Adapter and it applies only to server models that have a ThinkServer RAID 700 Adapter with the TR 700
Battery installed.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
2
on the ThinkServer RAID 700 Adapter. Carefully install the TR 700 Battery
.
Chapter 6
Installing, removing, or replacing hardware
1
lining up with
87

Advertisement

Table of Contents
loading

Table of Contents