Intelligent Diagnostics Module - Lenovo ThinkServer RD530 Hardware Maintenance Manual

6 Front USB connector 1
7
Front USB connector 2
Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you
have more than six USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.
8 Front VGA DB-15 connector (available in some models)
Used to attach a VGA-compatible video device, such as a VGA monitor.

Intelligent Diagnostics Module

This topic provides information about the Intelligent Diagnostics Module (hereinafter referred to as the IDM)
and the diagnostic LEDs on the module. Many errors are first indicated by a lit error LED on the diagnostic
panel of the server. If an LED is lit, one or more LEDs elsewhere in the server might also be lit to direct you to
the source of the error. See "System board LEDs" on page 40.
The following illustration shows the location of the IDM and the diagnostic LEDs on the IDM panel in the
front of the server. Depending on the model, your server might look slightly different from the illustrations in
this topic.
Figure 9. IDM panel
1
Power supply error LED
2
Ambient temperature limit LED
3
System fan error LED
1 Power supply error LED
When the power supply error LED is lit (amber), it indicates that there is a power supply problem. To identify
the failing power supply, check the status LED near the power cord connector on the redundant power
supply. When the LED is lit in green, it indicates that the power supply is working correctly. When the LED is
lit in amber, it indicates that the power supply is likely to fail or has failed.
Mem
PSU
PSU Mem CPU
4
Memory module error LED
5
Microprocessor error LED
CPU
.
Chapter 3
19
Product overview