Table of Contents
Advertisement
Change to terminal mode (also called command, local, direct, or
dumb mode). Check your software documentation for additional in-
structions.
Type AT plus the command you need and press Enter. You will see
an OK response.
When you finish, you can return to the data communications pro-
gram's standard user interface. See the software program's docu-
mentation if you need help.
To return to the factory default settings for the modem, in terminal
mode, type AT &F and press Enter.
Using Video
Your faxmodem supports video applications through the V.80 stan-
dard protocol so that it can be used for high-quality modem-to-
modem videoconferencing. The modem is compatible with H.324
point-to-point and H.323 Internet video conferencing standards. To
send videos, you need a camera and video software.
18
USB Modem Installation Guide
Advertisement
Table of Contents
Troubleshooting
