NEC NEAX 2000 IPS Reference Manual page 70

Chapter 3 System Highlights
Line Conditions
Description
Loop Resistance (including Telephone Set)
Analog Standard Line
Analog Long Line
Loop Resistance (including Opposite End Resistance)
Central Office Trunk
Tie Line Trunk (Loop Dial)
Tie Line Trunk (E&M)
Cable Length
SN716 Desk Console
8DLC/4DLC/2DLC Card
4DLC/2DLC Card with
AC Adapter
term
D Series i/E
8DLC/4DLC Card
2DLC Card
4DLC/2DLC Card with
AC Adapter
DSS/BLF Console
4DLC/2DLC Card with
AC Adapter
Zone Transceiver
ZTII-S (for S-Interface)
ZTII-S with AC Adapter
ZTII-U (for U-Interface)
ZTII-U with AC Adapter
Note: Cable length is based on cable with 0.5mm diameter and without lightning arresters
Page 3- 18
Max. 600 ohms
Max. 2,500 ohms (DP 10pps), Max. 1,700 ohms (DP 20pps)
Max. 1,200 ohms (DTMF)
Max. 1,700 ohms
Max. 2,500 ohms
Max. 900 ohms (only E-wire condition)
Note
Max. 350 meters (Max. 300 meters for 8DLC card)
Max. 1,200 meters
Max. 200 meters (Max. 300 meters for D
Max. 850 meters
Max. 1,200 meters
Max. 1,200 meters
Max. 1,210 meters @-48V, Max. 970 meters @-45V
Max. 1,340 meters @-48V
Max. 1,210 meters (2-wire), Max. 2,100 meters (4-wire) @-48V
Max. 970 meters (2-wire), Max. 1,700 meters (4-wire) @-45V
Max. 3,950 meters
Specifiations
NEAX2000 IPS Request For Proposal (RFP) Reference Guide
term term
8 and D 8D)
NDA-24349 Issue 4