NEC NEAX 2000 IPS Reference Manual page 178

Chapter 9 Feature Descriptions
Feature Activation from Secondary
Extension
This feature allows the Multiline Terminal user
to access an appearance of another extension
and program certain features from that
extension.
Flexible Line Key Assignment
Multiline Terminals can have any desired line-
key assignment. This feature permits
assignments to be tailored to each individual's
needs. (The terminal's primary extension line
appearance is the only line key that cannot be
reassigned.)
Flexible Numbering Plan
The NEAX2000 IPS has a Flexible Numbering
Plan. All access codes and station numbers
and can be assigned in system programming.
Refer also to the Single Digit Dialing Features
and Specifications, which further increases
the flexibility of the system.
Flexible Ringing Assignment
This feature allows lines on Multiline
Terminals to be individually programmed to
ring or not ring.
Forced Account Code
This feature forces the user to enter an
Account Code (up to 8 or 10 digits) for all
outgoing calls. The Account Code must be
dialed before dialing the outgoing number.
Calls are processed only when the dialed
Account Codes are valid.
Page 9- 20
Group Call -
Automatic Conference (6/10 Party)
This feature allows a Multiline Terminal user
or single line telephone user within the system
to establish a conference among as many as
six or ten parties. From a Multiline Terminal
/Single Line Telephone, a maximum of 9
stations can be paged simultaneously plus the
originator. The stations are assigned to the
simultaneous paging groups as participants
by the system data beforehand.
Group Call - 2 Way Calling
This feature allows a Multiline Terminal/Single
Line Telephone to page a maximum of fifteen
parties simultaneously including the originator.
After one of paged parties answers, the
paging becomes the 2 Way Calling between
the originator and the first answered party,
automatically stops paging other parties. The
stations are assigned to the simultaneous
paging groups as participants by the system
data beforehand.
Group Call by Pilot Number Dialing
This feature allows a station user (Multiline
Terminal / Single Line Telephone / PS) or a
trunk party to page a group of stations
simultaneously by dialing a pilot number. The
maximum of 32 stations can be assigned to a
paging group, and the paging group is
associated with the pilot number. After one of
the paged stations answers, the paging
becomes a 2 way calling between the calling
party and the first answered station and
automatically stops paging other stations.
Group Listening
When a Multiline Terminal user makes a call
using the handset, pressing the SPKR key will
allow others to listen through the built-in
speaker of the Multiline Terminal. The user
may continue talking on the handset at the
same time.
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4