NEC NEAX 2000 IPS Reference Manual page 168

Chapter 9 Feature Descriptions
Automatic Camp-on
An incoming Direct Inward Termination (DIT)
call which has been terminated to a busy
station can be Camped-On automatically.
When the busy station becomes idle, the
station is automatically called and connected
to the camped on incoming trunk call.
Automatic Number Identification (ANI)
This feature receives the calling subscriber's
number automatically sent from T1 network
using MF signaling and displays the calling
number on the LCD of a Multiline Terminal
and an Attendant Console.
Automatic Recall
This feature works as a timed reminder. When
a call remains on Hold, Camp-On or ringing
unanswered for a fixed interval after being
transferred, the station that initiated the hold,
transfer, or Camp-On is automatically alerted.
Automatic Wake-up
This feature allows the system to be
programmed to automatically call guest rooms
or administration stations at specified times.
Upon answering, the guest is connected to a
recorded announcement or music source. A
printout of unanswered or blocked Automatic
Wake-Up attempts for each guest room is
provided using the Hotel/Motel printer.
Background Music
Background Music can be provided on a dial-
up basis over legacy Multiline Terminal
speakers. Incoming voice announcements,
ringing and recalls override Background
Music. Up to 10 music programs can be
offered.
Page 9- 10
Back Up CPU
NEAX 2000 IPS provides a dual CPU system
with two MP cards. When Emergency
Notification from hardware is detected, the
changeover from an active MP card to a
standby MP card will occur. If the active MP
card becomes out of order for any reason, the
standby MP card starts up automatically. The
standby MP card employs a Cold Standby
System that will restart initialization by the
changeover from the active MP card.
Bandwidth Control
This feature allows to assign an available
bandwidth threshold for VoIP traffic within a
Location and between Locations, and to
restrict outgoing/incoming calls when the VoIP
traffic exceeds the threshold. The Location is
a group of VoIP devices (IP Enabled D
PAD, or Peer to Peer IP trunks (built-in IP
trunks)), which the same VoIP
communications parameters such as codec
selection list and ToS field value are
assigned.
When the VoIP traffic over CCIS exceeds the
threshold, the call can be routed to legacy
trunks (TDM network). When exceeding the
threshold, the system can store fault
information and provide external alarm
indication.
Boss / Secretary Calling
A secretary with a Multiline Terminal can use
an appearance of the boss' extension to
screen calls for that extension, and announce
and/or transfer calls to that extension.
Additionally, the secretary can call the boss
during a busy condition and send a Message
Waiting Indication to the boss' station.
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
term
, IP-
NDA-24349, Issue 4