Muratec QUADACCESS MFX-2550 Guide Printer Manual page 43

9
Click "IP" (or "IP Printer" for OS X 10.4).
The display switches to the IP settings screen.
10
In the "Protocol" field, select "Line Printer Daemon - LPD" from the pull-down
menu.
11
Enter the IP address or DNS name for the printer to connect in the "Address"
field.
12
Enter the name of the printer to connect in the "Name" field.
Make sure to enter a name.
13
If necessary, enter the name to display in the print job list in the "Queue" field,
and enter the location that the printer is installed in the "Location" field.
14
Select "Select a driver to use" ("Muratec" for OS X 10.4) from the pull-down
menu in the "Driver" ("Driver to Use" for OS X 10.4) field.
3-4 Installing Via a Network Connection