Muratec QUADACCESS MFX-2550 Guide Printer Manual page 38

9
Click [Browse], select the fax driver to install, and click [OK].
For details on the location of the fax driver to install, refer to
1-2.)
10
Click [Next], and follow the instructions on the screen.
• If the "User Account Control" screen is displayed, click [Continue].
• If the Windows Security screen is displayed, click [Install this driver software anyway].
11
Click [Finish].
12
After the installation is finished, confirm that "Printer" is displayed for the
name of the installed fax driver.
13
Remove the disc from the CD-ROM drive.
Note
If SNMP is enabled, the fax driver may not operate normally.
Follow the procedure below to disable the SNMP settings.
1 Open the "Printers" folder, right-click the printer name without selecting it, and
select [Server Properties].
2 Select the specified port from the "Ports" tab, and click [Configure Port].
3 Deselect "SNMP Status Enabled".
"Overview of
Installing From the Add Printer Wizard
Drivers". (See page
2-23
1
2