Page Layout" Tab - Muratec QUADACCESS MFX-2550 Guide Printer Manual

"Page Layout" Tab

You can specify settings related to the layout of the paper.
Item
Combine
(See page 6-12.)
Print
Separator
Line
Advanced
*1
Watermark
(See page 6-33.)
First Page
Only
Advanced
Select the number of document pages to combine from the pull-down menu.
You can select the following number of pages:
Off / 2-up / 4-up / 8-up
You can set the page order in the advanced settings.
Note
This function cannot be used if IPP is set as the printer port.
Select this to print a separator line between each combined page.
Click [Advanced] to display the "Layout Settings" dialog.
Select the watermark to print from the pull-down menu.
You can click [Advanced] to create, edit, or delete watermarks. For details,
refer to "Watermark Settings Dialog
Select this to only print the watermark on the first page printed.
Click [Advanced] to display the "Watermark Settings" dialog.
Description
Box". (See page 6-49.)
Driver Print Settings
1
2
3
4
5
6
6-47