Opening The Officebridge Administrator Settings - Muratec QUADACCESS MFX-2550 Guide Printer Manual

Opening the OfficeBridge Administrator Settings

You can open the Administrator Settings for OfficeBridge from the installer.
Note
This operation cannot be performed with a local (USB) connection.
1
Click [Machine Settings (for Administrator)].
2
Set the IP address of the machine that is connected.
• Enter the IP address in the "XXX.XXX.XXX.XXX" format (where XXX is a number between 0
and 255).
• You cannot enter "0.0.0.0".
• If you do not know the IP address, you can detect the IP address of connected devices on the
"Device Search" screen. First, click [Search] to display the Device Search screen. Next, click
[Refresh]. If the "Windows Security Alert" screen is displayed, click [Unblock], and then click
[Refresh] again. Select the device name from the list, and click [OK]. (The "Windows Security
Alert" screen is not displayed from the second time you perform this operation.)
3
Click [Display].
The browser will open and you can log in with the administrator mode.
For details, refer to the OfficeBridge Guide.
9-10

Opening the OfficeBridge Administrator Settings