Muratec QUADACCESS MFX-2550 Guide Printer Manual page 102

4
Click the "Page Layout" tab.
5
Select the binding direction from the "Binding Position" pull-down menu.
6
Click [Advanced].
The "Binding Margin Settings" dialog box is displayed.
7
Select the margin unit, and specify the margin.
• If you are performing one-sided printing, only set the margin for the front side.
• If you are performing duplex printing, set the margin for both the front side and back side.
8
Click [OK].
The "Binding Margin Settings" dialog box is closed.
Various Printing Methods
1
2
3
4
5
6
6-19