Muratec QUADACCESS MFX-2550 Guide Printer Manual page 32

5
Select "Create a new port", and select "Standard TCP/IP Port" from the pull-down
menu.
6
Click [Next].
7
Enter the IP address or DNS name in "Hostname or IP address", enter a unique
port name in "Port name", and click [Next].
If a device is not found with the specified IP address, the "Additional Port Information
Required" screen is displayed. Confirm that "Standard" and "Generic Network Card" are
selected in Device Type, and click [Next].
8
Click [Have Disk].
The "Install From Disk" dialog is displayed.
Installing From the Add Printer Wizard
1
2
2-17