Muratec QUADACCESS MFX-2550 Guide Printer Manual page 132

„ Watermark Settings Dialog Box
You can click register, edit, or delete watermarks.
Item
Watermark
Add
Edit
Delete
Name
Watermark String
Fonts
Size
Italic
Bold
Angle
Position
Shading
For details on the procedure for setting watermarks, refer to
6-34.)
Displays a list of the registered watermarks.
Click this to register a new watermark.
Click this to edit the selected watermark.
Click this to delete the selected watermark.
Enter the name to register for the watermark. (Maximum of 30 characters.)
Enter a text string to be printed as the watermark. (Maximum of 30 characters.)
Select the font to use from the pull-down menu.
Set the size of the string (10 to 144 point).
Select this to set the italic style for the string.
Select this to set the bold style for the string.
Select the angle for the string from the pull-down menu.
You can select the following angles for the string:
Horizontal / Vertical / Diagonal / User Set
If you select "User Set", you can set a custom angle. (Between -180 and 180 degrees)
Select "Center" or "User Set".
If you select "User Set", you can set a horizontal position (between -10.0 and
10.0) and a vertical position (between -10.0 and 10.0) based on the center of
the paper.
Select the density for the string from the pull-down menu.
You can select the following densities for the string:
10 % / 25 % / 50 % / 75 % / 100 %
Description
"Registering a Watermark".
Driver Print Settings
1
2
3
4
5
6
(See page
6-49