Error And Status Messages On The Screen - Ricoh Aficio SP C232SF User Manual

Troubleshooting

Error and Status Messages on the Screen

"X" indicates the parts of the messages that appear differently depending on a specific
situation, such as the paper sizes or types, tray names, or toner colors.
Message
(alphabetical order)
ADF JAM Open ADF
Cover and Clear Jam
Bypass Tray Paper
Empty
Bypass Tray Paper
Size Mismatch?Y/N
Bypass Tray Paper
Type Mismatch?Y/N
Cancel Print JOB
I/O TimeOut
20
Causes
An original has
been jammed
inside the ADF.
The bypass tray
has run out of
paper.
The paper size set
for the document
differs from the
size of the paper
in the tray.
The paper type set
for the document
differs from the
type of the paper
in the tray.
The timeout period
set in [I/O Timeout]
expires when printing
is frequently
interrupted by data
from other ports, or
when printing data is
large and takes time
for processing.
Solutions
• Remove jammed originals, and then
place them again. See "Removing
from the ADF" on page 29.
• Check the originals are suitable
for scanning. See "Placing
Originals", User Gudie.
Load paper to the bypass tray.
See "Loading Paper in the Bypass
Tray", User Guide.
Press the [B&W Start] key or
[Color Start] key to begin printing,
or press the [Clear/Stop] key to
cancel the job.
Press the [B&W Start] key or
[Color Start] key to begin printing,
or press the [Clear/Stop] key to
cancel the job.
If [I/O Timeout] is set to 15
seconds, increase the time period.
For details, see "Machine
Settings", User Guide.