Table of Contents
Advertisement
10
Connections
– Using Your Instrument with Other Devices –
This chapter covers the connectors of this instrument. To see where the connectors are located on the instrument,
refer to pages 14 – 15.
CAUTION
Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turning any components on
or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the components, electrical shock, or even permanent hearing loss
may occur.
Connecting a Footswitch/Foot Controller (FOOT PEDAL jacks)
The FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to one of the FOOT
PEDAL jacks. A footswitch can be used for switching functions on and off, while a foot controller controls
continuous parameters such as volume.
By default, each jack features the following function. Use the FC4A or FC5
footswitch.
• FOOT PEDAL [1] ..... Switches sustain on or off.
• FOOT PEDAL [2] ..... Controls the Super Articulation Voices (page 37).
You can also change the function assignments to the pedals as desired.
• Example: Controlling Song Start/Stop by footswitch
Connect a footswitch (FC4A or FC5) to one of the FOOT PEDAL jacks.
To assign the function to the connected pedal, select "SONG PLAY/PAUSE" in the
operation display: [FUNCTION] → TAB [E] MENU 1 → [D] CONTROLLER →
TAB [E] FOOT PEDAL.
Advanced Features
Refer to the Reference Manual on the website, Chapter 10.
Assigning specific functions to each foot
pedal:
Foot Pedals
FC4A
FC5
FC7
[FUNCTION] → TAB [E] MENU 1 → [D] CONTROLLER →
TAB [E] FOOT PEDAL
PSR-S975/S775 Owner's Manual
NOTE
Do not connect or disconnect the
pedal when the power is on.
NOTE
For details on functions that can be
assigned to the pedals, refer to the Ref-
erence Manual on the website.
97
10
Advertisement
Table of Contents
