Egress Table; Egress Table (Vlanconfigegresstable); Egress Entry (Vlanconfigegressentry) - Cabletron Systems SmartSTACK ELS10-27TX Supplement Manual

VLAN MIB Objects

4.5 Egress Table

4.5.1 Egress Table (VlanConfigEgressTable)

This table allows for the specifying of the default VLAN ID for a specific port. If
NOT configured as an 'Access' port, then packets containing this VLAN ID will
have the tag stripped on egress, if it matches the PVID. This will set the PVID for
each port contained within the list.
els10-27VlanConfigEgressTable
SYNTAX SEQUENCE OF Els10-27VlanConfigEgressEntry
ACCESS not-accessible
STATUS mandatory
::= { els10-27VlanConfigVlan 5 }
The MIB OBJECT IDENTIFIER for accessing the VlanConfigEstablish is:
OID 1.3.6.1.4.1.97.9.20.6.5

4.5.2 Egress Entry (VlanConfigEgressEntry)

Allows for configuration of specific Egress entries. Although this is configured
as a table, there is only a single instance. Entries should be referenced as simple
variables.
els10-27VlanConfigEgressEntry OBJECT-TYPE
SYNTAX Els10-27VlanConfigEgressEntry
ACCESS not-accessible
STATUS mandatory
INDEX { els10-27VlanEgressVID }
::= { els10-27VlanConfigEgressTable 1 }
The MIB OBJECT IDENTIFIER for accessing the VlanConfigEstablish is:
OID 1.3.6.1.4.1.97.9.20.6.5.1
4-12
OBJECT-TYPE