Table of Contents
Advertisement
About Web browser setting
When running EpsonNet WebAssist, be sure not to use a proxy
server to access the Internet. If the Access the Internet using a
proxy server check box is selected, you cannot use EpsonNet
WebAssist. Use the following steps to clear the Access the Internet
using a proxy server check box.
1. Right-click the Internet Explorer icon on the desktop, and
then select Properties.
2. Click the Connection tab.
3. Clear the Access the Internet using a proxy server check
box.
Configuring the Print Server Using EpsonNet
WebAssist
After you have assigned an IP address to the print server using
EpsonNet WinAssist, MacAssist, or the arp/ping command, you
can configure the print server using EpsonNet WebAssist.
Note:
A web browser must be installed on your computer.
TCP/IP must be correctly set for the computer and the print server.
Do not run both EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist at the same time.
Your browser may restrict some characters you can use. For details,
see your browser or OS documentation.
If you are using the dial-up environment and not using NetWare,
select Disable in the NetWare screen. If Enable is selected, the
extra account might be charged when you are using the dial-up
router.
202
EpsonNet WebAssist
Advertisement
Table of Contents
