Protocol Setup (Appletalk) - Epson RIP Station 5100 Administrator's Manual

4
4-12 Using Fiery WebSetup
T A T
O CONFIGURE PPLE ALK AND
• Click the Protocol2 tab in the Network Setup window.

Protocol Setup (AppleTalk)

Enable AppleTalk
connected to the RIP Station. This setting enables the RIP Station to communicate
over AppleTalk networks.
—The RIP Station searches the network for AppleTalk zones in your
Select Zone
network segment. Scroll through the list to select the AppleTalk zone in which you
want the RIP Station to appear. If your segment has only one zone, the RIP Station is
assigned to that zone automatically.
If no AppleTalk zone can be found, your network may have no defined zones, or the
network cable has not been connected (see page 6-4). Choose OK.
IPX :
FRAME TYPES
—Select to enable Apple Talk if you have an AppleTalk network