Retrieving Fax Messages; Changing Your Fax Forwarding Number - Brother MFC-665CW User Manual

Chapter 10
Retrieving fax messages
You can call your machine from any touch
tone phone and have your fax messages sent
to a machine.
@
@
@
Dial your fax number.
When your machine answers, enter
your remote access code (3 digits
followed by -X-)at once. If you hear one
long beep, you have messages.
When you hear two short beeps, press
962.
@
Wait for the long beep, enter the number
(up to 20 digits) of the remote fax
machine you want your fax messages
sent to using the dial pad, then enter # #.
Note .......................................................................................
You cannot use -X-and # as dial numbers.
However, press # if you want to create a
pause.
Press 9 0 to reset the machine when
you've finished.
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Changing your Fax
Forwarding number
You can change the default setting of your fax
forwarding number from another touch tone
telephone or fax machine.
@
@
@
Dial your fax number.
When your machine answers, enter
your remote access code (3 digits
followed by -X-)at once. If you hear one
long beep, you have messages.
When you hear two short beeps, press
954.
@
Wait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the dial
pad, then enter # #.
Note .......................................................................................
You cannot use -X-and # as dial numbers.
However, press # if you want to create a
pause.
Press 90 to reset the machine when you
have finished.
Hang up after you hear your machine
beep.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! ! 86