Receive Mode Settings; Ring Delay; Fit Ring Time (Fax/Tel Mode Only) - Brother MFC-665CW User Manual

Receiving a Fax
Receive mode settings
Ring Delay
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension phones on the same line as the
machine or subscribe to the telephone
company's Distinctive Ring service, keep the
ring delay setting of 4.
(See Using external and extension
telephones on page 61 and Easy
Receive on page 50.)
If toll saver is on, then the ring delay setting
has no effect. See Setting toll
saveron page 74. (MFC-665CW only)
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Setup Receive.
Press OK.
O Press • or • to choose Ring
Delay,
Press OK.
Press • or • to choose Ring Delay,
Press OK.
@
Press • or • to choose how many
times the line rings before the machine
answers (0-4).
Press OK.
If you choose 0, the line will not ring at
all.
Press Stop/Exit.
FIT Ring Time
(Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, yOU
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone.
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Setup Receive.
Press OK.
O Press • or • to choose
F/T Ring Time.
Press OK.
@
Press • or • to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds).
Press OK.
Press Stop/Exit.
Note ..................................................................................
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
49