Installing The Ct3 Feature Card - Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle Installation Manual

Chapter 4 Channelized T3 Feature Card
Figure 4-6
Figure 4-7
After you remove the feature card from the chassis, set it aside on an ESD-preventive mat.
Step 10
If a feature card slot on the carrier card is to remain empty, install a blank cover over the open feature
Step 11
card slot to ensure proper airflow inside the chassis. (See
Figure 4-8

Installing the CT3 Feature Card

Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
When you replace a feature card with a new feature card of the same type in the same slot, the system
Note
software recognizes the new feature card and brings up the trunk interfaces automatically. If you replace
the existing feature card with a new feature card of a different type, you must reconfigure the system.
For configuration details, see the
Configuration
78-17406-01
Removing the Feature Card from the Cisco AS5350XM Universal Gateway
Removing the Feature Card from the Cisco AS5400XM Universal Gateway
Blank Feature Card Cover
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software
Guide.
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
Online Insertion and Removal of the CT3 Feature Card
Figure 4-8.)
4-5