Chapter 2
Feature Card and Carrier Card Guidelines
Figure 2-5
After you remove the carrier card from the chassis, set it aside on an ESD-preventive mat.
Step 5
If the backplane slot is to remain empty, install a blank cover over the open slot to ensure proper airflow
Step 6
inside the chassis. (See
Figure 2-6
Installing a Populated Carrier Card
To install a populated carrier card:
Slide the carrier card into the slot until it touches the backplane connector. (See
Step 1
Figure
Figure 2-7
78-17406-01
Removing the Carrier Card from the Cisco AS5400XM
Figure
2-6.)
Blank Filler Panel
2-8.)
Installing the Carrier Card in the Cisco AS5350XM
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
Removing and Installing Populated Carrier Cards
Figure 2-7
and
2-5