Ct3 Feature Card Cable And Port Pinouts - Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle Installation Manual

CT3 Feature Card Cable and Port Pinouts

Insert the 36-pin cable connector into the 36-pin port on the 8-port T1 or E1 feature card. Tighten the
Step 5
captive screws on the 36-pin cable connector to secure the cable to the feature card. (See
Figure A-11
CT3 Feature Card Cable and Port Pinouts
Table A-12
Table A-12
Pin
Receiver port (on the left)
1
2
Transmitter port
1
2
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
A-12
Connecting the 36-Pin Cable Connector to an 8-Port T1 or E1 Feature Card
lists the CT3 feature card port pinouts.
CT3 Feature Card Port Pinouts
Description
Rx signal
Ground
Tx signal
Ground
Appendix A Cabling Specifications
Figure A-11.)
78-17406-01