Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle Installation Manual page 30

Removing and Installing Populated Carrier Cards
Figure 2-8
Align the captive screws with their holes, and seat the card completely.
Step 2
Tighten the two captive screws to secure the carrier card to the chassis. (See
Step 3
Figure 2-9
Captive screw
Figure 2-10
Captive
screw
If the carrier card has a blank feature card slot, install a blank cover over the open feature card slot to
Step 4
ensure proper airflow inside the chassis. (See
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
2-6
Installing the Carrier Card in the Cisco AS5400XM
Tightening the Captive Screws on the Cisco AS5350XM
Tightening the Captive Screws on the Cisco AS5400XM
Chapter 2 Feature Card and Carrier Card Guidelines
Captive screw
Captive
screw
Figure 2-11.)
Figure 2-9 and Figure 2-10.)
78-17406-01