Appendix A
Cabling Specifications
8-Port T1 or E1 Feature Card Cable and Port Pinouts
You can align the molded RJ-45 ends of the cables in one of the following ways:
Step 2
Place the molded RJ-45 ends of the cables next to each other. This placement creates space between
•
the last molded RJ-45 end of the cable and the edge of the bracket adjacent to it. Route the cables
through this space. (See
Figure
A-8.)
Figure A-8
Routing Cables with Molded RJ-45 Ends of Cables Next to Each Other
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
A-9
78-17406-01