Restrictions For The Universal Port And Dial-Only Feature Cards - Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle Installation Manual

Overview
Figure 5-1
The versions of the universal port and dial-only feature cards are identified on the card faceplate. The
Note
universal port feature card faceplates are labeled NP-60 or NP-108, depending on the number of calls
supported. The dial-only feature card faceplates are labeled DL-60 or DL-108, depending on the number
of calls supported.

Restrictions for the Universal Port and Dial-Only Feature Cards

If a dial-only feature card is installed in a chassis with the universal port feature card, only the dial
services are supported.
universal gateways with dial-only feature cards, universal port feature cards, or both types of cards
installed in the chassis.
We do not recommend deploying dial-only feature cards in a chassis that supports voice and fax services,
Caution
because voice or fax calls assigned to the dial-only feature card will fail.
For information about mixing voice feature cards with the universal port and dial-only feature cards, see
Note
the
Table 5-1
Feature Cards Installed
Only dial-only feature cards installed
Only universal port feature cards installed
Both universal port and dial-only feature cards
installed
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
5-2
Universal Port or Dial-Only Feature Card
Table 5-1
"Restrictions for the Voice Feature Card" section on page
Features Supported on Universal Port and Dial-Only Feature Cards
Chapter 5
describes the behavior of the Cisco AS5350XM and Cisco AS5400XM
Services Supported
Dial services
Dial, voice, and fax services
Dial services
Universal Port and Dial-Only Feature Cards
6-2.
78-17406-01