Other Printing Problems - Ricoh Aficio MP C2500 EFI Troubleshooting Manual

Troubleshooting When Using the Printer Function

Other Printing Problems

This section explains likely causes of and possible solutions for problems that
can occur when printing from a computer.
Problem
Print is smudges. Settings for thick
The print on the
entire page is
4
faded.
The print on the
entire page is
faded.
The print on the
entire page is
faded.
The print on the
entire page is
faded.
Image bleeds
when rubbed.
Paper is not fed
from the selected
tray.
56
Cause Solution
• PCL 5c/6 and PostScript 3
paper have not Select [Thick] in the [Type:] list on the [Paper] tab.
been made when
• RPCS
printing on thick
Select [Thick] in the [Paper type:] list on the [Print Set-
paper in the by-
tings] tab.
pass tray.
When D is blink-
Add toner. See p.90 "Adding Toner".
ing, toner is be-
ginning to run
out.
The paper is Use paper that has been stored in the recommended
damp. temperature and humidity condition. See "Copy Paper",
About This Machine.
The paper is un- Use the recommended paper. (Printing on coarse or
suitable. treated paper might result in faint print image.) See
"Copy Paper", About This Machine.
If the [Toner sav- For the RPCS printer driver, [Toner saving] is located on
ing] check box is the [Print Quality] tab. For the PostScript 3 printer driver,
selected in the see PostScript 3 Supplement. See the printer driver
printer driver Help.
settings, the en-
tire page will be
faded when
printed.
If you are using On the printer driver's [Setup] tab, set [Paper type:] to
thick paper, [Pa- [Thick]. See the printer driver Help.
per type:] might
not be set to
[Thick].
When you are Set the desired input tray using the printer driver. See
using a Windows the printer driver Help.
operating sys-
tem, printer driv-
er settings
override those
set using the dis-
play panel.