Ricoh Aficio MP C2500 EFI Troubleshooting Manual page 77

Message
Exceeded max.
number of files
which can be
sent at the same
time. Reduce the
number of the
selected files.
Cannot detect
original size.
Place original
again, then
press the Start
key.
Exceeded max.
No. of results
to display.
Max.:
You do not have
the privileges
to use this
function.
Exceeded max.
number of stand-
by files.Try
again after the
current file is
sent.
Exceeded time
limit for LDAP
server search.
Check the server
status.
Cause
The number of files exceeded the
maximum number possible.
You have loaded paper of a size
not shown on the paper size se-
lector.
Search results have exceeded the
max. displayable number.
The machine has not been set to
allow you to use the function.
The maximum number of stand-
by files was exceeded.
A network error has occurred
and connection has failed.
When a Message is Displayed
Solution
Reduce the number of files and
send them again.
• Place the original correctly.
• Specify the scan size.
• When placing an original di-
rectly on the exposure glass,
the lifting/ lowering action of
the ADF triggers the automat-
ic original size detection proc-
ess. Lift the ADF by more than
30 degrees. See "Placing Orig-
inals", Copy/Document Serv-
er Reference.
Search again after changing the
search conditions.
Contact the administrator.
There are 100 files waiting in the
sending queue for e-mail, Scan to
Folder, or delivery functions.
Wait until files have been sent.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See "System Settings", Gen-
eral Settings Guide.
5
69