Ricoh Aficio MP C2500 EFI Troubleshooting Manual page 17

Problem
The main power indica-
tor continues blinking
and does not turn off
when pressed.
"
Self check-
" appears.
ing...
Original images are
printed on the reverse
side of the paper.
Misfeeds occur frequently. The tray's side fences may not be
Misfeeds occur frequently. The tray's end fence may not be
Misfeeds occur frequently. Paper of undetectable size has
Misfeeds occur frequently. There is a foreign object on the
Cause
This occurs in the following cases:
• The exposure glass cover or
ADF is open.
• The machine is communicat-
ing with external equipment.
• The hard disk is active.
• The dial-in function is being
used when the facsimile unit
is installed.
The machine is performing image
adjustment operations.
You may have loaded the paper
incorrectly.
locked.
set properly.
been loaded.
finisher tray.
When You Have Problems Operating the Machine
Solution
Close the exposure glass cover or
ADF, and check if the machine is
communicating with a computer.
The machine may perform period-
ic maintenance during operations.
The frequency and duration of
maintenance depends on the hu-
midity, temperature, and printing
factors such as number of prints,
paper size, and paper type. Wait
for the machine to get ready.
Load paper correctly. Place paper
in the paper tray with the print
side up. Load paper into the by-
pass tray with the print side
down. See p.83 "Orientation-
Fixed Paper or Two-Sided Pa-
per".
• Remove the paper. See p.103
"Removing Jammed Paper".
• Check the side fences are
locked. See p.84 "Changing
the Paper Size".
• Remove the paper. See p.103
"Removing Jammed Paper".
• Check the end fence is set
properly. See p.84 "Changing
the Paper Size".
• Remove the paper. See p.103
"Removing Jammed Paper".
• When loading the paper of
undetectable size, specify the
paper size in "Tray Paper
Size". See "Paper Size: Tray1-
4",General Settings Guide and
"Copy Paper",About This Ma-
chine.
• Remove the paper. See p.103
"Removing Jammed Paper".
• Do not place anything on the
finisher tray. It may cause a
paper jam.
1
9